Voron 0.1 ABS Printed Parts kit - USA made and shipped

Description

This is a 3D printed Kit for the Voron 0.1.
These are printed in ABS!
If you select Custom Color please send me a message with what color you want.
If you need a custom color or custom part send me a message I can do many colors and I do all high temp materials.
These exceed the recommended settings by the Voron team! 0.2mm layer height.
5 Perimeters, 50% Grid Infill, 5 Top Layers, 5 Bottom Layers.
This kit includes every functional part to get your Voron 0.1 up and running.
This kit
DOES NOT
include non-essential parts such as the skirts, panel mounts and electronics compartments. You can print those yourself once you get your Voron running.
Below is the list of every part included:
Tools Heads - Mini Afterburner:
[a]_Cowling_dragon_x1
[a]_Cowling_BMO_x1(optional)
[a]_Cowling_Mosquito_x1(optional)
[a]_Mid_Body_x1
Guidler_DD_x1
Latch_DD_x1
Latch_Shuttle_DD_x1
Motor_Frame_x1
Strain_Relief_Body_x1
Strain_Relief_Spacers_x2
Functional Assembly Parts:
[a]_9mm_Spacer_x6
[a]_A_Drive_Tensioner_x1
[a]_B_Drive_Tensione_x1
[a]_Cable_Tie_x1
[a]_Foot_Front_x2
[a]_Foot_Rear_Left_x1
[a]_Foot_Rear_Right_x1
[a]_Railstops_x6
[a]_Tensioner_Knob_x2
[a]_Thumb_Nut_x3
[a]_X_Endstop_Bumper_x1
[a]_Z_Endstop_Mount_x1
[a]_Z_Motor_Mount_x1
A_Drive_Frame_Lower_x1
A_Drive_Frame_Upper_x1
A_Idler_Lower_x1
A_Idler_Upper_x1
B_Drive_Frame_Lower_x1
B_Drive_Frame_Upper_x1
B_Idler_Lower_x1
B_Idler_Upper_x1
Front_Bed_Mount_x1
M2_Nut_Adapter_Rotated_x5
MGN7_Rail_Guide_x2
Power_Inlet_x1
PSU_Cover_x1
Raspberry_Pi_3b_Mount_x1
Rear_Bed_Mount_Left_x1
Rear_Bed_Mount_Right_x1
Skr_E3_Mounting_Bracket_x1
Spool_Holder_V0_x1
T8_Nut_Block_16mmx22mmOD_x1
X_Carriage_90_x1
XY_Joint_Left_Lower_x1
XY_Joint_Left_Upper_x1
XY_Joint_Right_Lower_x1
XY_Joint_Right_Upper_x1