Voron 0.1 ABS ALL Parts Printed Parts kit - USA made and shipped

Description

This is a 3D printed Kit for the Voron 0.1 with all the printed parts for entire build.
These are printed in ABS
If you need a custom color or custom part send me a message I can do many colors and I do all high temp materials.
These exceed the recommended settings by the Voron team! 0.2mm layer height.
5 Perimeters, 50% Grid Infill, 5 Top Layers, 5 Bottom Layers.
This kit includes every functional part and aesthetic part for your Voron 0.1.
Below is the list of every part included:
Tools Heads - Mini Afterburner:
[a]_Cowling_dragon_x1
[a]_Cowling_BMO_x1(optional)
[a]_Cowling_Mosquito_x1(optional)
[a]_Mid_Body_x1
Guidler_DD_x1
Latch_DD_x1
Latch_Shuttle_DD_x1
Motor_Frame_x1
Strain_Relief_Body_x1
Strain_Relief_Spacers_x2
Functional Assembly Parts:
[a]_9mm_Spacer_x6
[a]_A_Drive_Tensioner_x1
[a]_B_Drive_Tensione_x1
[a]_Cable_Tie_x1
[a]_Foot_Front_x2
[a]_Foot_Rear_Left_x1
[a]_Foot_Rear_Right_x1
[a]_Railstops_x6
[a]_Tensioner_Knob_x2
[a]_Thumb_Nut_x3
[a]_X_Endstop_Bumper_x1
[a]_Z_Endstop_Mount_x1
[a]_Z_Motor_Mount_x1
A_Drive_Frame_Lower_x1
A_Drive_Frame_Upper_x1
A_Idler_Lower_x1
A_Idler_Upper_x1
B_Drive_Frame_Lower_x1
B_Drive_Frame_Upper_x1
B_Idler_Lower_x1
B_Idler_Upper_x1
Front_Bed_Mount_x1
M2_Nut_Adapter_Rotated_x5
MGN7_Rail_Guide_x2
Power_Inlet_x1
PSU_Cover_x1
Raspberry_Pi_3b_Mount_x1
Rear_Bed_Mount_Left_x1
Rear_Bed_Mount_Right_x1
Skr_E3_Mounting_Bracket_x1
Spool_Holder_V0_x1
T8_Nut_Block_16mmx22mmOD_x1
X_Carriage_90_x1
XY_Joint_Left_Lower_x1
XY_Joint_Left_Upper_x1
XY_Joint_Right_Lower_x1
XY_Joint_Right_Upper_x1
Panel_Mounting:
Door_Handle_x1.stl
Door_Latch_x2.stl
Panel_Mounting > For_2.5mm_Panels:
2point5mm_Bottom_Corner_Front_x1.STL
2point5mm_Bottom_Corner_Rear_mirror_x1.stl
2point5mm_Bottom_Corner_Rear_x1.STL
2point5mm_Bottom_Corner_Side_mirror_x1.stl
2point5mm_Bottom_Corner_Side_x2.STL
2point5mm_Hinge_Bottom_A_x1.STL
2point5mm_Hinge_Bottom_B_x1.STL
2point5mm_Hinge_Top_A_x1.STL
2point5mm_Hinge_Top_B_x1.STL
2point5mm_Middle_Clip_x9.STL
2point5mm_Top_Corner_Front_x1.STL
2point5mm_Top_Corner_Rear_mirror_x1.stl
2point5mm_Top_Corner_Rear_x1.stl
2point5mm_Top_Corner_Side_mirror_x1.stl
2point5mm_Top_Corner_Side_x2.STL
Tools:
BMG_Shaft_Mod_Spacer_x1.STL
AB_pulley_jig_x1.stl
Tophat:
Front_and_Rear_Midclip_x2.STL
Left_and_Right_Midclip_x2.STL
Lower_Corner_1_and_3_Clip_x2.stl
Lower_Corner_2_and_4_Clip_x2.STL
Tophat_Part1_x1.STL
Tophat_Part2_x2.STL
Tophat_Part3_x1.STL
Unibody_Tophat_x1.STL
Upper_Corner_1_and_3_Clip_x2.STL
Upper_Corner_2_and_4_Clip_x2.STL
Skirts:
Skirt_mirror_x3.STL
Skirt_x3.STL