T8280 IR Preheating Oven PCB Preheater T-8280 Infrared Preheating Station CE

Description

IR Preheating Oven
T8280
Preheating Station
CE
Approved New!!
100% Original!
Products Features:
1. This machine selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely.
2. T-8280 can achieve to heat PCB board and component which contains lead or not
，
especially for the BGA and SMD parts.
3. Use infrared heat, easy to cut through, heat proportion, don’t have sirocco flow. Don’t shift the small components on the PCB board
，
ensure the welding quality.
4. This machine has 600W heating system, widely to 280x270mm.Can use together with the handhold infrared welder T-835.
5. Easily operate, you can operate it through easy training.
Technical Parameter:
Work bench size
410x316mm
Rated voltage and frequency
AC220-230v/AC110V   60/50Hz
Complete machine power
1600W
Preheating plate power
1500W
Preheating plate size
280x270mm
Preheating plate temperature adjustable
0-450
℃
Main Components:
Preheating plate main body
1
Temperature sensor
1
PCB board holder
1
Power line
1
User manual (compact disc)
1
Main
component
function
explanation
：
Operation instructions
：
1. Inspect the machine and then open it
① Check the connection of the power line.
② Turn on the power switch. Allow the T-8280 Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.
③The black switch on the front panel are used to control the infrared preheating plate; press the blue button “
▲
”(up)
，
the red button“
▼
”(down), can adjust the infrared preheating plate temperature between 0 ℃ and  450℃. Press the button“ON”
，
the infrared preheating plate starts to work, press“OFF”
，
it stops working.
2. Operation of preheating PCB board
(1) The placement and adjustment of the PCB board
：
① According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob.
②According to the size of PCB board and welding technological requirement, press the blue button “
▲
”(up)and the red button  “
▼
” (down), regulate the output temperature of preheating plate between 0℃ and 450℃
(2) Preheating open and close:
① Press the “ON” button
，
open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step .
② Finishing, press “OFF”, the preheating plate stops working.
Attention
：
Don’t close the power switch until the machine full cooling.
③The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120℃; if not, adjust to 120-140℃. You can also set the preheating temperature according to the user’s experience and technology.
3. Machine installation and adjustment:
The preheating plate heating type includes: the total pressure flow-through heating way and the PID percentage adjustment way. You can adjust it according to the preheating allowance. Generally speaking, if the preheating temperature is lower than 250 ℃ , selects the PID percentage adjustment method; and if the preheating temperature is higher than 250℃, use the total pressure flow-through heating way.
Adjustment method
：
1. Press “
▲
”power-on, display: C=?
2. Press “
▲
”choose 0 or 1,every press the status change one time,
C=0 is PID percentage adjustment, C=1 is switching control.
3. Press “
▼
”OK
Cautions!
1. After finishing, don’t turn off the power immediately; make sure the infrared preheating plate complete cooling.
2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly!
3. The high temperature operation, pay attention, avoid scalding.
4. If you don’t use the machine for a long time, you’d better pull off the power source plug!
Warranty
：
The whole machine maintains for one year and the spare parts maintains for three months. .Provides the immediate network online Q/A and the technical advisory work service.
Statement
：
If there is any difference between users operating manual and actual product, according to the actual product!