Portable DXCHMEI 1.3 " OLED Soldering Iron Station with T12 Handle date display

Description

Home
DXCHMEI 1.3 " OLED Soldering Iron Station DIY Kits with T12 Handle date display
Description
110V 220V OLED Digital Soldering Iron Station & T12 Handle Finished Controller
Describe
Special note
: soldering station, the default is not grounded, such as the need to ground on their own.
(Handle to the machine on the line is connected,
need
the five-
core and ground wire on the line. T12 + and sleep
the middle of the two pins)
New solder iron T12 tip need to set the temperature to below 250 for tin protection
By default, we will send the T12-K, if you need to replace T12-K with other tips, please tell us, you can also purchase
more tips from the picture below.
Features
host size: 120* 80*38mm / 4.72 * 3.15 * 1.50 inch
board size: about 68 * 30 * 33mm /2.68 * 1.18 * 1.30 inch,
Includes encoder and buzzer height
display size: 1.3 inch OLED
power voltage: AC 100-240V
powe plug: US / EU plug
heating core support: T12,1321,1322,1323, 2-wire 907 heating core
temperature range: 150℃~465℃ (recommended range of 300℃ to 380℃ )
sleep time: 1 to 255 minutes (recommended range of 5 to 20 minutes)
sleep temperature: 100℃ to 445℃ (recommended range of 100℃ to 200℃)
ncoder step range: 1 to 99 (recommended range from 1 to 10)
language: English / Russian / Korean
Calibration parameter
: 0.1 to 2.55 (
The smaller the value, the higher the temperature, and the
higher the value, the lower the temperature. Generally, the calibration is between 0.6 and 1.0
)
shutdown time: 1 to 255 minutes (recommended range of 5 to 20 minutes)
date display: YES
clock display: YES
buzzer switch: YES
Low-voltage protection:
Mainly for battery protection settings, can be freely set
Automatic temperature compensation: The soldering station will strengthen the solder joint
temperature for rapid soldering at large solder joints
Room temperature detection
:
Detect room temperature, so that the temperature is
accurate and the welding temperature is good
Package Included:
1 * OLED digital controller
1 * 907 handle（T12-K tip）
1 * Foot pad
1 * Standby sleep switch
1 * US / EU plug Power cable
Policy
1.Payment
● We accept Payment via PayPal only.
VAT and TAX is not included, please note.
2.Delivery details
● Will ship order within 1 working days after get your payment.
● Shipping to US,AU,UK and CA takes about 7-15 working days for delivery normally.
3.Return
●Please note that we only accept returns within 30 days after delivery.
4.About us
● We will make every effort to make your shopping the most pleasant and wonderful! Any question feel free to contact us!