DC5015 Brushless Turbo Fan 5CM 5V 12V 24V Micro Centrifugal Fan 3D Printer New

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DC5015 Brushless Turbo Fan 5CM 5V 12V 24V Micro Centrifugal Fan for 3D Printer
Popular
Popular
Product Introduction
Product selling points:
1. Machine silent oil-containing micro centrifugal fan
2. Adopt a 5cm diameter DC turbine
3. Centrifugal fan design
4. The product is simple and convenient to use
5. Made with high-quality PBT material conscience
Specification:
Bearing: Sleep Bearing
Rated voltage: 5VDC
Operating voltage: 3.7V~7VDC
Starting voltage: <3.7VDC
Rated current: 0.20±0.05A
Rated power: 1W±10%
Rated speed: 4000rpm/min±10%
Maximum air volume: 0.14m3/h
Maximum static pressure: 16.60pa or 0.30inch-H2O
Noise: 33.7dBA
Life expectancy: 30000hrs at 40℃
Operating temperature and humidity range: -10~+65℃ 15%~90%RH
Storage temperature and humidity range: -20~+85℃ 15%~90%RH
Product shell material: PBT material
Notice:
1. Please do not exceed the limit specified in this specification when using, otherwise we do not guarantee this product
2. The screw torque of the lock shell shall not exceed 4Kg
List:
Oil-containing miniature centrifugal fan
5V
12V
24V
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DC5015 Brushless Turbo Fan 5CM 5V 12V 24V Micro Centrifugal Fan for 3D Printer
Product Introduction
Product selling points:
1. Machine silent oil-containing micro centrifugal fan
2. Adopt a 5cm diameter DC turbine
3. Centrifugal fan design
4. The product is simple and convenient to use
5. Made with high-quality PBT material conscience
Specification:
Bearing: Sleep Bearing
Rated voltage: 5VDC
Operating voltage: 3.7V~7VDC
Starting voltage: <3.7VDC
Rated current: 0.20±0.05A
Rated power: 1W±10%
Rated speed: 4000rpm/min±10%
Maximum air volume: 0.14m3/h
Maximum static pressure: 16.60pa or 0.30inch-H2O
Noise: 33.7dBA
Life expectancy: 30000hrs at 40℃
Operating temperature and humidity range: -10~+65℃ 15%~90%RH
Storage temperature and humidity range: -20~+85℃ 15%~90%RH
Product shell material: PBT material
Notice:
1. Please do not exceed the limit specified in this specification when using, otherwise we do not guarantee this product
2. The screw torque of the lock shell shall not exceed 4Kg
List:
Oil-containing miniature centrifugal fan
5V
12V
24V
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.