CREALITY Tempered Glass Build Hotbed CR 20 Ender 3 /Pro/5 3D Printer 235X235mm

Description

CREALITY Tempered Glass Build Hotbed CR 20 Ender 3 /Pro/5 3D Printer 235X235mm Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models. Temperature settings for different filaments: PLA:50-70ºC Flexible filament: 50-70ºC ABS:100-125ºC (110ºCis recommended) PC:100-130ºC (120ºC is recommended) Nelon:90-120ºC (110ºC is recommended) PP:100-130ºC (120 ºC is recommended) PETG: 50-70ºC
CREALITY Tempered Glass Build Hotbed CR 20 Ender 3 /Pro/5 3D Printer 235X235mm
CREALITY Ender Pro Glass Bed
CREALITY Tempered Glass Build Hotbed CR 20 Ender 3 /Pro/5 3D Printer 235X235mm
Product Characteristics
1.Leveling: Use A4 paper to adjust to the platform and the nozzle till there is obvious hindrance, but to be able to pull.
2.Oily Clean: Severe oil on the surface of the platform will affect adhesion,if this happened, please heat the bed to 90℃, or put the printer aways for 8 hours, but the most direct way is to wipe a little with alcohol.
3.This product acid and alkali resistant, high temperature resistance 400℃.
4.The first layer of the product has a hardness of 0.5H, which is easier to be scratched, but the scratching does not affect the adhesion of the models.
5.This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.
6.This product will enhance the viscosity and absorb oil ability of the platform after being slightly wiped with alcohol.
7.Try to avoid repeated touches on the platform by hand to prevent serious sweat from touching the platform.
8.This product is processed with a special process and will never appear in the glass, good solution to the problem of platform unevenness.
Temperature settings for different filaments:
PLA:50-70ºC
Flexible filament: 50-70ºC
ABS:100-125ºC (110ºCis recommended)
PC:100-130ºC (120ºC is recommended)
Nelon:90-120ºC (110ºC is recommended)
PP:100-130ºC (120 ºC is recommended)
PETG: 50-70ºC
Compatible Models：
Ender-3 V2/Ender-3/Ender-3 Pro/Ender-3S/CR20/CP-01/Ender-5/Ender-5S/Ender-5 Pro
Specification:
Material:Special Glass + microporous coatings