Aluminum Heated Bed 12V 24V Hotbed With Wire Cable Platform Kit for Anet A8 A6

Description

Aluminum Extrusion Profile Frame Kit For VORON 0.1 3D Printer Frame Profile Set
Description
Pay attention:
The 300X300X3MM heatbed have 12V and 24V type.
The 12V of 300X300 heatbed is for anet e12 3d printers and the 24V of 300*300 heatbed is for the anet A8 plus and E16 3d printers.
The 12V of 220X220X3MM heatbed is for anet A6 A8 3d printers.
New 24V220X220X3MM is for new Version of ET4 ET4X ET4 pro 3d printers.Pay attention: it is not fit for the old version of ET4 printer. Check your printer before making the order. Hole distance is the 185*185MM.
Other types of 160X160, 270X220，200x300，220x220  is only 12V.
Features:
1, the whole board full gold process, the cost is much higher than the spray tin plate!
2, the whole board after optical short circuit, open circuit detection.
3, due to heating table and aluminum plate into one, better temperature stability.
Size:220mm*220mm*3mm/220mm*270mm*3mm/300mm*300mm*3mm
Resistance: 12V voltage, the resistance of 1.2 ohms
voltage: 12V
Size:
160*160: Power: 160w, Pitch: 69*149.5mm, Weight: 245g
220*220: power: 180w, hole distance: 208*208mm, weight: 436g
220*270: power: 210w, hole distance: 210*210mm, weight: 538g
200*300: power: 210w, hole distance: 130*185mm, weight: 508g
300*300: power: 220w, hole distance: 276*208mm, weight: 758g
400*400: power: 260w, hole distance: 350*350mm, weight: 1647g
500*500: power: 280w, hole spacing: 460*460mm, weight: 2105g
Process: Aluminum plate
Color: black on the back, positive silver white
Thickness: 3mm
Thermistor: the NTC 100K 1% 3950
Note:12V connection: a line then 1, another line at the same time then 2,3
220*220*3MM size heatbed Perfectly fits as a replacement for the thin Anycubic i3 Mega and Mega S hotbed!
Pay attention: 300*300*3MM heatbed cable port is on the left of corner. There is a little diffrence from the picture,
but the using condition is in good.
And about to the 220*220 size heatbed, there is new version on the surface, it cancel the warning LED guiding light. Other is the same using condition. Hope understanding!
TECHNICAL SPECIFICATIONS:
Voltage Input:
12V/24V 220W
Compatibility:
CR-20 Pro, DIY 3D Printer
Material:
Aluminum
Size:
220x 220mm (Length x Breadth)
Thickness:
3mm
Color:
Black with White Silkscreen
Package Included
1Set(Hotbed Aluminum Heated Bed with line)