220V Elektrischer Lötkolben Electric Soldering Iron Accessories Doppelzweck

Description

Product Description
220V Elektrischer Lötkolben Electric Soldering Iron Accessories Doppelzweck
feature:
The electric dual-purpose tin sucker has a beautiful appearance and is convenient for sucking tin. It can be used to remove the components from the circuit board without damaging the components and the circuit board.
Specially used to replace integrated circuits and multi-pin switches.
The tin suction cup can be used as a general electric iron.
It is an indispensable tool for professional maintenance personnel in national defense, scientific research, communications, aerospace, computer, radio, television, electronics, and radio enthusiasts.
instruct:
1. Use 220V 50Hz power supply, 30W power;
2. Turn on the power and warm up for 3-5 minutes;
3. Push the piston handle down to align the soldering nozzle with the soldering part; after the solder is melted, press the control button, and the solder is sucked into the cylinder;
4. The tin suction device is equipped with two suction nozzles with different diameters, depending on the thickness of the component lead;
5. When soldering, operate like a soldering iron;
6. When disassembling the cylinder, press down on the top of the cylinder in the direction of the arrow and pull the cylinder and the handle apart at the same time to separate the cylinder; when disassembling the suction nozzle, rotate it counterclockwise and remove it;
Notes:
1. Check whether the voltage is consistent, too high or too low voltage is not conducive to use;
2. Tighten the cylinder and the suction nozzle before use to prevent leakage. Otherwise it will affect the suction.
3. Frequently remove the solder impurities in the suction nozzle and the cylinder, and add a little oil to the piston;
4. After each use, push the piston 3-4 times to remove the remaining straws, so that the straws and straws can be used smoothly next time;
5. It is strictly forbidden to install and disassemble part of its electrical components when the tin sucker is powered on.
6. When the new tin suction pump is used for the first time, it is normal that there is slight smoke due to heating. It disappears naturally after ten minutes.
7. When using, it must be equipped with a natural cooling soldering iron stand, and the suction pen should be placed in the soldering iron stand.
8. If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or maintenance department or similar professional personnel.
9. This product has a grounding wire and should be used with sockets with contacts. Please be careful.
Package Included:
1*Electric soldering soldering iron with dual-purpose suction soldering iron
Note:
1. The actual color of the product may be slightly different from the website picture due to various factors such as the brightness of the display and the brightness of the light.
2. Please allow the data to have a slight deviation from manual measurement.
Payment
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.